Check it out...First 2 Numbers GUARANTEED! Want to Win the Lottery? Click Here!

Printer Setup


Having trouble aligning your Selection Slips?
The following procedure will assist you (Will take 15 to 30 minutes):

For these objectives you will use the Calibrate screen and Configuration Menu
A) Objective...Setup the Board Layout for your particular lottery
**) Only Objective required if you do not want to print slips
  1. Click on Action -> Calibrate -> Start -> Config -> Edit Board Layout
  2. This will open Notepad with a sample Board Layout
  3. Edit the Board Layout to match your Lottery
  4. Numbers 1 to 9 followed by 2 spaces
  5. Numbers 10 to 56 followed by 1 space
It is quite easy to setup the Board Layout for your particular lottery but if you require assistance please E-Mail me an image of your Selection Slip and I will create a Board Layout for you.

Default Board <<<<< COMPARE >>>>> Edited Board Layout

B) Objective...Adjust the size of the "Mark" as required
  1. Click on Config button to take you to the Configuration Menu
  2. Adjust the "Length of Mark" option
  3. Adjust the "Width of Mark" option
  4. Click on Change button to view change
  5. Click on Print button and inspect the Selection Slip
  6. Continue this procedure until the "Mark" is the desired size
Before Mark Adjustment <<<<< COMPARE >>>>> After Mark Adjustment
C) Objective...Print top left "Mark" over top left number of your Selection Slip
  1. Use buttons (Up, Down, Left, Right) to position Selection Slip pattern
  2. Click on Print button and inspect the Selection Slip
  3. Continue this procedure until the "Mark" is in proper position
  4. Click here to see proper positioning
D) Objective...Align the horizontal spacing of the "Marks"
  1. Click on Config button to take you to the Configuration Menu
  2. Adjust the "Distance between Columns of Marks" option
  3. Click on Change button to view change
  4. Click on Print button and inspect the Selection Slip
  5. Continue this procedure until the "Marks" are properly positioned
Before Column Adjustment <<<<< COMPARE >>>>> After Column Adjustment
E) Objective...Align the vertical spacing of the "Marks"
  1. Click on Config button to take you to the Configuration Menu
  2. Adjust the "Distance between Rows of Marks" option
  3. Click on Change button to view change
  4. Click on Print button and inspect the Selection Slip
  5. Continue this procedure until the "Marks" are properly positioned
Before Row Adjustment <<<<< COMPARE >>>>> After Row Adjustment
F) Objective...Set "Distance to Board(s)" option (Only one Board at a time)
  1. Click on Config button to take you to the Configuration Menu
  2. Adjust the "Distance to Board" option
  3. Click on Change button to view change
  4. Click on Print button and inspect the Selection Slip
  5. Continue this procedure until the Board is properly positioned
[...] Repeat this procedure for the remaining Boards...Click on samples below for guidance
  1. Adjusted distance to second row of boards"
  2. Adjusted distance to third row of boards"
  3. Adjusted distance to fourth row of boards"
  4. Adjusted distance to fifth row of boards"
G) Objective...Set "Spacing between Boards" (*Only required for 10 board Lotteries)
  1. Click on Config button to take you to the Configuration Menu
  2. Adjust the "Distance to Second Column of Boards" option
  3. Click on Change button to view change
  4. Click on Print button and inspect the Selection Slip
  5. Continue this procedure until the Boards are properly spaced
Before Spacing Adjustment <<<<< COMPARE >>>>> After Spacing Adjustment
Additional Hints
Lotto Printer program does not print?
You will have to make adjustments to your printer's software settings as follows:
  1. Click Start -> Settings -> Printers
  2. Right Click your Printer Icon and a Menu will appear
  3. Click Properties
  4. Your Printer's Properties Window will appear
  5. Experiment with different settings
  6. Click Apply -> OK...to make your settings take effect
  7. Try printing from Lotto Printer program
www.lottoprinter.com